spiderfoot Documentation

File: README.md Copy Chapter

SpiderFoot is an open source intelligence (OSINT) automation tool. It integrates with just about every data source available and utilises a range of methods for data analysis, making that data easy to navigate.

SpiderFoot has an embedded web-server for providing a clean and intuitive web-based interface but can also be used completely via the command-line. It's written in Python 3 and MIT-licensed.

FEATURES Copy Section

• Web based UI or CLI
• Over 200 modules (see below)
• Python 3.7+
• YAML-configurable correlation engine with 37 pre-defined rules
• CSV/JSON/GEXF export
• API key export/import
• SQLite back-end for custom querying
• Highly configurable
• Fully documented
• Visualisations
• TOR integration for dark web searching
• Dockerfile for Docker-based deployments
• Can call other tools like DNSTwist, Whatweb, Nmap and CMSeeK
• Actively developed since 2012!

WANT MORE? Copy Section

Need more from SpiderFoot? Check out SpiderFoot HX for:

• 100% Cloud-based and managed for you
• Attack Surface Monitoring with change notifications by email, REST and Slack
• Multiple targets per scan
• Multi-user collaboration
• Authenticated and 2FA
• Investigations
• Customer support
• Third party tools pre-installed & configured
• Drive it with a fully RESTful API
• TOR integration built-in
• Screenshotting
• Bring your own Python SpiderFoot modules
• Feed scan data to Splunk, ElasticSearch and REST endpoints

See the full set of differences between SpiderFoot HX and the open source version here.

USES Copy Section

SpiderFoot can be used offensively (e.g. in a red team exercise or penetration test) for reconnaissance of your target or defensively to gather information about what you or your organisation might have exposed over the Internet.

You can target the following entities in a SpiderFoot scan:

• IP address
• Domain/sub-domain name
• Hostname
• Network subnet (CIDR)
• ASN
• E-mail address
• Phone number
• Username
• Person's name
• Bitcoin address

SpiderFoot's 200+ modules feed each other in a publisher/subscriber model to ensure maximum data extraction to do things like:

• Host/sub-domain/TLD enumeration/extraction
• Email address, phone number and human name extraction
• Bitcoin and Ethereum address extraction
• Check for susceptibility to sub-domain hijacking
• DNS zone transfers
• Threat intelligence and Blacklist queries
• API integration with SHODAN, HaveIBeenPwned, GreyNoise, AlienVault, SecurityTrails, etc.
• Social media account enumeration
• S3/Azure/Digitalocean bucket enumeration/scraping
• IP geo-location
• Web scraping, web content analysis
• Image, document and binary file meta data analysis
• Dark web searches
• Port scanning and banner grabbing
• Data breach searches
• So much more...

INSTALLING & RUNNING Copy Section

To install and run SpiderFoot, you need at least Python 3.7 and a number of Python libraries which you can install with pip. We recommend you install a packaged release since master will often have bleeding edge features and modules that aren't fully tested.

Stable build (packaged release):

wget https://github.com/smicallef/spiderfoot/archive/v4.0.tar.gz
 tar zxvf v4.0.tar.gz
 cd spiderfoot-4.0
 pip3 install -r requirements.txt
 python3 ./sf.py -l 127.0.0.1:5001

Development build (cloning git master branch):

git clone https://github.com/smicallef/spiderfoot.git
 cd spiderfoot
 pip3 install -r requirements.txt
 python3 ./sf.py -l 127.0.0.1:5001

Check out the documentation and our asciinema videos for more tutorials.

COMMUNITY Copy Section

Whether you're a contributor, user or just curious about SpiderFoot and OSINT in general, we'd love to have you join our community! SpiderFoot now has a Discord server for seeking help from the community, requesting features or just general OSINT chit-chat.

WRITING CORRELATION RULES Copy Section

We have a comprehensive write-up and reference of the correlation rule-set introduced in SpiderFoot 4.0 here.

Also take a look at the template.yaml file for a walk through. The existing 37 rules are also quite readable and good as starting points for additional rules.

MODULES / INTEGRATIONS Copy Section

SpiderFoot has over 200 modules, most of which don't require API keys, and many of those that do require API keys have a free tier.

DOCUMENTATION Copy Section

Read more at the project website, including more complete documentation, blog posts with tutorials/guides, plus information about SpiderFoot HX.

Latest updates announced on Twitter.

File: correlations/README.md Copy Chapter

Background Copy Chapter

SpiderFoot’s goal is to automate OSINT collection and analysis to the greatest extent possible. Since its inception, SpiderFoot has heavily focused on automating OSINT collection and entity extraction, but the automation of common analysis tasks -- beyond some reporting and visualisations -- has been left entirely to the user. The meant that the strength of SpiderFoot's data collection capabilities has sometimes been its weakness since with so much data collected, users have often needed to export it and use other tools to weed out data of interest.

Introducing Correlations Copy Chapter

We started tackling this analysis gap with the launch of SpiderFoot HX in 2019 through the introduction of the "Correlations" feature. This feature was represented by some 30 "correlation rules" that ran with each scan, analyzing data and presenting results reflecting SpiderFoot's opinionated view on what may be important or interesting. Here are a few of those rules as examples:

• Hosts/IPs reported as malicious by multiple data sources
• Outlier web servers (can be an indication of shadow IT)
• Databases exposed on the Internet
• Open ports revealing software versions
• and many more.

With the release of SpiderFoot 4.0 we wanted to bring this capability from SpiderFoot HX to the community, but also re-imagine it at the same time so that the community might not simply run rules we provide, but also write their own correlation rules and contribute them back. We also hope that just as with modules, we see a long list of contributions made in the years ahead so that all may benefit.

With that said, let's get into what these rules look like and how to write one.

Key concepts Copy Chapter

YAML Copy Section

The rules themselves are written in YAML. Why YAML? It’s easy to read, write, allows for comments and is increasingly commonplace in many modern tools.

Rule structure Copy Section

The simplest way to think of a SpiderFoot correlation rule is like a simple database query that consists of a few sections:

1. Defining the rule itself (id, version and meta sections).
2. Stating what you'd like to extract from the scan results (collections section).
3. Grouping that data in some way (aggregation section; optional).
4. Performing some analysis over that data in some way (analysis section; optional).
5. Presenting the results (headline section).

Example rule Copy Section

Here's an example rule that looks at SpiderFoot scan results for data revealing open TCP ports where the banner (the data returned upon connecting to the port) reports a software version. It does so by applying some regular expressions to the content of TCP_PORT_OPEN_BANNER data elements, filtering out some false positives and then grouping the results by the banner itself so that one correlation result is created per banner revealing a version:

id: open_port_version
version: 1
meta:
  name: Open TCP port reveals version
    A possible software version has been revealed on an open port. Such
    information may reveal the use of old/unpatched software used by
    the target.
  risk: INFO
collections:
  - collect:
      - method: exact
        field: type
        value: TCP_PORT_OPEN_BANNER
      - method: regex
        field: data
        value: .*[0-9]\.[0-9].*
      - method: regex
        field: data
        value: not .*Mime-Version.*
      - method: regex
        field: data
        value: not .*HTTP/1.*
aggregation:
  field: data
headline: "Software version revealed on open port: {data}"

The outcome Copy Section

To show this in practice, we can run a simple scan against a target, in this case focusing on performing a port scan:

-> # python3.9 ./sf.py -s www.binarypool.com -m sfp_dnsresolve,sfp_portscan_tcp            
2022-04-06 08:14:58,476 [INFO] sflib : Scan [94EB5F0B] for 'www.binarypool.com' initiated.
...
sfp_portscan_tcp    Open TCP Port Banner    SSH-2.0-OpenSSH_7.2p2 Ubuntu-4ubuntu2.10
...
2022-04-06 08:15:23,110 [INFO] correlation : New correlation [open_port_version]: Software version revealed on open port: SSH-2.0-OpenSSH_7.2p2 Ubuntu-4ubuntu2.10
2022-04-06 08:15:23,244 [INFO] sflib : Scan [94EB5F0B] completed.

We can see above that a port was found to be open by the sfp_portscan_tcp module, and it happens to include a version. The correlation rule open_port_version picked this up and reported it. This is also visible in the web interface:

NOTE: Rules will only succeed if relevant data exists in your scan results in the first place. In other words, correlation rules analyze scan data, they don't collect data from targets.

How it works Copy Section

In short, SpiderFoot translates the YAML rules into a combination queries against the backend database of scan results and Python logic to filter and group the results, creating "correlation results" in the SpiderFoot database. These results can be viewed in the SpiderFot web interface or from the SpiderFoot CLI. You can also query them directly out of the SQLite database if you like (they are in the tbl_scan_correlation_results table, and the tbl_scan_correlation_results_events table maps the events (data elements) to the correlation result).

The rules Copy Section

Each rule exists as a YAML file within the /correlations folder in the SpiderFoot installation path. Here you can see a list of rules in 4.0, which we hope to grow over time:

cert_expired.yaml                    host_only_from_certificatetransparency.yaml  outlier_ipaddress.yaml
cloud_bucket_open.yaml               http_errors.yaml                             outlier_registrar.yaml
cloud_bucket_open_related.yaml       human_name_in_whois.yaml                     outlier_webserver.yaml
data_from_base64.yaml                internal_host.yaml                           remote_desktop_exposed.yaml
data_from_docmeta.yaml               multiple_malicious.yaml                      root_path_needs_auth.yaml
database_exposed.yaml                multiple_malicious_affiliate.yaml            stale_host.yaml
dev_or_test_system.yaml              multiple_malicious_cohost.yaml               strong_affiliate_certs.yaml
dns_zone_transfer_possible.yaml      name_only_from_pasteleak_site.yaml           strong_similardomain_crossref.yaml
egress_ip_from_wikipedia.yaml        open_port_version.yaml                       template.yaml
email_in_multiple_breaches.yaml      outlier_cloud.yaml                           vulnerability_critical.yaml
email_in_whois.yaml                  outlier_country.yaml                         vulnerability_high.yaml
email_only_from_pasteleak_site.yaml  outlier_email.yaml                           vulnerability_mediumlow.yaml
host_only_from_bruteforce.yaml       outlier_hostname.yaml

Rule components Copy Section

The rules themselves are broken down into the following components:

Meta: Describes the rule itself so that humans understand what the rule does and the risk level of any results. This information is used mostly in the web interface and CLI.

Collections: A collection represents a set of data pulled from scan results, to be used in later aggregation and analysis stages. Each rule can have multiple collections.

Aggregations: An aggregation buckets the collected data into groups for analysis in distinct groups of data elements.

Analysis: Analysis performs (you guessed it) analysis on the data to whittle down the data elements to what ultimately gets reported. For example, the analysis stage may look only for cases where the data field is repeated in the data set, indicating it was found multiple times and therefore discarding any only appearing once.

Headline: The headline represents the actual correlation title that summarizes what was found. You can think of this as equivalent to a meal name (beef stew), and all the data elements as being the ingredients (beef, tomatoes, onions, etc.).

Creating a rule Copy Section

To create your own rule, simply copy the template.yaml file in the correlations folder to a meaningful name that matches the ID you intend to provide it, e.g. aws_cloud_usage.yaml and edit the rule to fit your needs. Save it and re-start SpiderFoot for the rule to be loaded. If there are any syntax errors, SpiderFoot will abort at startup and (hopefully) give you enough information to know where the error is.

The template.yaml file is also a good next point of reference to better understand the structure of the rules and how to use them. We also recommend taking a look through the actual rules themselves to see the concepts in practice.

Rule Reference Copy Chapter

id: The internal ID for this rule, which needs to match the filename.

version: The rule syntax version. This must be 1 for now.

meta: This section contains a few important fields used to describe the rule.

• name: A short, human readable name for the rule.
• description: A longer (can be multi-paragraph) description of the rule.
• risk: The risk level represented by this rule's findings. Can be INFO, LOW, MEDIUM, HIGH.

collection: A correlation rule contains one or more collect blocks. Each collect block contains one or more method blocks telling SpiderFoot what criteria to use for extracting data from the database and how to filter it down.

• collect: Technically, the first method block in each collect block is what actually pulls data from the database, and each subsequent method refines that dataset down to what you’re seeking. You may have multiple collect blocks overall but the rule remains that within each collect, the first method pulls data from the database and subsequent method blocks within the collect refine that data.

  • method: Each method block tells SpiderFoot how to collect and refine data. Each collect must contain at least one method block. Valid methods are exact for performing an exact match of the chosen field to the supplied value, or regex to perform regular expression matching.

  • field: Each method block has a field upon which the matching should be performed. Valid fields are type (e.g. INTERNET_NAME), module (e.g. sfp_whois) and data, which would be the value of the data element (e.g. in case of an INTERNET_NAME, the data would be the hostname). After the first method block, you can also prefix the field with source., child. or entity. to refer to the fields of the source, children or relevant entities of the collected data, respectively (see multiple_malicious.yaml and data_from_docmeta.yaml as examples of this approach).

  • value: Here you supply the value or values you wish to match against the field you supplied in field. If your method was regex, this would be a regular expression.

aggregation: With all the data elements in their collections, you can now aggregate them into buckets for further analysis or immediately generate results from the rule. While the collection phase is about obtaining the data from the database and filtering down to data of interest, the aggregation phase is about grouping that data in different ways in order to support analysis and/or grouping reported results.

Aggregation simply iterates through the data elements in each collection and places them into groups based on the field specified. For instance if you pick the type field, you’ll end up with data elements with the same type field grouped together. The purpose of this grouping is two-fold: to support the analysis stage, or if you don’t have the analysis stage, it’s how your correlation results will be grouped for the user.

• field: The field defines how you'd like your data elements grouped together. Just like the field option in method blocks above, you may prefix the field with source., child. or entity. to apply the aggregation on those fields of the data element instead. For example, if you intended to look for multiple occurrences of a hostname, you would specify data here as that field, since you want to count the number of times the value of the data field appears.

analysis
The analysis section applies (you guessed it) some analysis to the aggregated results or collections directly if you didn’t perform any aggregation, and drops candidate results if they fail this stage. Various analysis method types exist, and each takes different options, described below.

• method:
  • threshold: Drop any collection/aggregation of data elements that do not meet the defined thresholds. You would use this analysis rule when wanting to generate a result only when a data element has appeared more or less than a limit specified, for instance reporting when an email address is reported just once, or more than 100 times.
    • field: The field you want to apply the threshold too. As per above, you can use child., source. and entity. field prefixes here too.
    • count_unique_only: By default the threshold is applied to the field specified on all data elements, but by setting count_unique_only to true, you can limit the threshold to only unique values in the field specified, so as not to also count duplicates.
    • minimum: The minimum number of data elements that must appear within the collection or aggregation.
    • maximum: The maximum number of data elements that must appear within the collection or aggregation.
  • outlier: Only keep outliers within any collection/aggregation of data elements.
    • maximum_percent: The maximum percentage of the overall results that an aggregation can represent. This method requires that you have performed an aggregation on a certain field in order to function. For example, if you aggregate on the data field of your collections, and one of those buckets contains less than 10% of the overall volume, it will be reported as an outlier.
    • noisy_percent: By default this is 10, meaning that if the average percentage every bucket is below 10%, don't report outliers since the dataset is anomalous.
  • first_collection_only: Only keep data elements that appeared in the first collection but not any others. For example, this is handy for finding cases where data was found from one or several data sources but not others.
    • field: The field you want to use for looking up between collections.
  • match_all_to_first_collection: Only keep data elements that have matched in some way to the first collection. This requires an aggregation to have been performed, as the field used for aggregation is what will be used for checking for a match.
    • match_method: How to match between all collections and the first collection. Options are contains (simple wildcard match), exact and subnet which reports a match if the expected field may contain an IP address that is within the first collection field containing a subnet.

headline
After all data elements have been collected, filtered down, aggregated and analyzed, if data elements are remaining, these are what we call "correlation results" -> the results of your correlation rule. These need a "headline" to summarize the findings, which you can define here. To place any value from your data into the headline, you must enclose the field in {}, e.g. {entity.data}. There are two ways to write a headline rule. The typical way is to simply have headline: titletexthere, or have it as a block, in which case you can be more granular about how the correlation results are published:

• text: The headline text, as described above.
• publish_collections: The collection you wish to have associated with the correlation result. This is not often needed, but more in combination with the match_all_to_first_collection analysis rule in case your first collection is only used as a reference point and not actually contain any data elements you wish to publish with this correlation result. Take a look at the egress_ip_from_wikipedia.yaml rule for an example of this used in practice.

A note about `child.`, `source.` and `entity.` field prefixes Copy Section

Every data element pulled in the first match rule in a collection will also have any children (data resulting from that data element), the source (the data element that this data element was generated from) and entity (the source, or source of source, etc. that was an entity like IP address, domain, etc.). This enables you to prefix subsequent (and only subsequent!) match block field names with child., source. and entity. if you wish to match based on those fields. These prefixes, as shown above, can also be used in the aggregation, analysis and headline sections too.

It is vital to note that these prefixes always are in reference to the first match block within each collect block, since every subsequent match block is always a refinement of the first match block.

This can be complicated, so let's use an example to illustrate. Let's say your scan has found a hostname (a data element type of INTERNET_NAME) of foo, and it found that within some webpage content (a data element type of TARGET_WEB_CONTENT) of "This is some web content: foo", which was from a URL (data element type of LINKED_URL_INTERNAL) of "https://bar/page.html", which was from another host named bar. Here's the data discovery path:

bar [INTERNET_NAME] -> https://bar/page.html [LINKED_URL_INTERNAL] -> This is some web content: foo [TARGET_WEB_CONTENT] -> foo [INTERNET_NAME]

If we were to look at This is some web content: foo in our rule, here are the data and type fields you would expect to exist (module would also exist but has been left out of this example for brevity):

• data: This is some web content: foo
• type: TARGET_WEB_CONTENT
• source.data: https://bar/page.html
• source.type: LINKED_URL_INTERNAL
• child.data: foo
• child.type: INTERNET_NAME
• entity.type: INTERNET_NAME
• entity.data: bar

Notice how the entity.type and entity.data fields for "This is some web content: foo" is not the LINKED_URL_INTERNAL data element, but actually the bar INTERNET_NAME data element. This is because an INTERNET_NAME is an entity, but a LINKED_URL_INTERNAL is not.

You can look in spiderfoot/db.py to see which data types are entities and which are not.

File: docs/index.rst Copy Chapter

.. spiderfoot documentation master file, created by
sphinx-quickstart on Sat Jun 26 01:55:34 2021.
You can adapt this file completely to your liking, but it should at least
contain the root toctree directive.

Welcome to spiderfoot's documentation!

.. toctree::
:maxdepth: 4
:caption: Contents:

spiderfoot

Indices and tables

• :ref:genindex
• :ref:modindex
• :ref:search

File: docs/spiderfoot.rst Copy Chapter

spiderfoot package

Submodules Copy Chapter

spiderfoot.db module Copy Chapter

.. automodule:: spiderfoot.db
:members:
:undoc-members:
:show-inheritance:

spiderfoot.event module Copy Chapter

.. automodule:: spiderfoot.event
:members:
:undoc-members:
:show-inheritance:

spiderfoot.helpers module Copy Chapter

.. automodule:: spiderfoot.helpers
:members:
:undoc-members:
:show-inheritance:

spiderfoot.plugin module Copy Chapter

.. automodule:: spiderfoot.plugin
:members:
:undoc-members:
:show-inheritance:

spiderfoot.target module Copy Chapter

.. automodule:: spiderfoot.target
:members:
:undoc-members:
:show-inheritance:

Module contents Copy Chapter

.. automodule:: spiderfoot
:members:
:undoc-members:
:show-inheritance: